Table 24-5 Menu 2.2.1 Advanced Dial Backup Setup: Call Control Parameters - ZyXEL Communications Prestige 662HW Series User Manual

Table 24-4 Menu 2.2.1 Advanced Dial Backup Setup: AT Commands Fields
FIELD
CLID (Calling Line Enter the keyword that precedes the CLID (Calling Line Identification) in the
Identification) AT response string. This lets the Prestige capture the CLID in the AT
response string that comes from the WAN device. CLID is required for CLID
authentication.
Called Id Enter the keyword preceding the dialed number.
Speed Enter the keyword preceding the connection speed.

Table 24-5 Menu 2.2.1 Advanced Dial Backup Setup: Call Control Parameters

FIELD
Call Control
Dial Timeout (sec) Enter a number of seconds for the Prestige to keep trying to set up an
outgoing call before timing out (stopping). The Prestige times out and
stops if it cannot set up an outgoing call within the timeout value.
Retry Count Enter a number of times for the Prestige to retry a busy or no-answer
phone number before blacklisting the number.
Retry Interval (sec) Enter a number of seconds for the Prestige to wait before trying another
call after a call has failed. This applies before a phone number is
blacklisted.
Drop Timeout (sec) Enter a number of seconds for the Prestige to wait before dropping the
DTR signal if it does not receive a positive disconnect confirmation.
Call Back Delay Enter a number of seconds for the Prestige to wait between dropping a
(sec) callback request call and dialing the co-responding callback call.
Menu 2 WAN Backup Setup
Prestige 662HW Series User's Guide
DESCRIPTION
DESCRIPTION
EXAMPLE
NMBR =
TO
CONNECT
EXAMPLE
60 seconds
0 to disable
the blacklist
control
20 seconds
15 seconds
24-5