Prestige 662HW Series User's Guide
#
MENU TITLE
11
Remote Node Setup
12
Static Routing Setup
14
Dial-in User Setup
15
NAT Setup
21
Filter and Firewall Setup
22
SNMP Configuration
23
System Security
24
System Maintenance
25
IP Routing Policy Setup
26
Schedule Setup
27
VPN/IPSec
99
Exit
22.3 Changing the System Password
Change the Prestige default password by following the steps shown next.
Enter 23 in the main menu to display Menu 23 - System Security.
1.
Enter 1 to display Menu 23.1 - System Security - Change Password as shown next.
2.
Type your existing system password in the Old Password field, for example "1234", and press
3.
[ENTER].
Menu 23.1 - System Security - Change Password
Old Password= ?
New Password= ?
Retype to confirm= ?
Type your new system password in the New Password field (up to 30 characters), and press
4.
[ENTER].
Re-type your new system password in the Retype to confirm field for confirmation and press
5.
[ENTER].
Note that as you type a password, the screen displays an "*" for each character you type.
22-4
Table 22-2 Main Menu Summary
Use this menu to set up the Remote Node for LAN-to-LAN connection,
including Internet connection.
Use this menu to set up static routes.
Use this menu to set up local user profiles on the Prestige.
Use this menu to specify inside servers when NAT is enabled.
Use this menu to configure filters, activate/deactivate the firewall and view the
firewall log.
Use this menu to set up SNMP related parameters.
Use this menu to set up wireless security and change your password.
This menu provides system status, diagnostics, software upload, etc.
Use this menu to configure your IP routing policy.
Use this menu to schedule outgoing calls.
Use this menu to configure VPN connections.
Use this to exit from SMT and return to a blank screen.
Enter here to CONFIRM or ESC to CANCEL:
Figure 22-4 Menu 23.1 Change Password
DESCRIPTION
Introducing the SMT