Dead-Man's Switch - HAKO Hakomatic B45 Instruction Manual

Operation
Dead-man's switch (Fig. 9/4)
If the dead-man's switch on the bail sy-
stem is released during operation, the
traction drive, brush head drive and so-
lution supply are switched off. The suc-
tion turbine remains switched on.
Direction switch (Fig. 9/5)
The direction switch is used to preselect
the driving direction for the machine.
Switch to front = forward drive
Switch to rear = reverse drive
To change the driving direction, bring
the machine to a stop, select the new di-
rection and start again.
Driving speed control (Fig. 9/6)
The driving speed control is a conti-
nuously adjustable knob to set the ma-
chine speed.
Symbol for silence kit (option)
(Fig. 9/8)
The LED lights up when the silence kit
function is switched on.
Symbol for tool connection (option)
(Fig. 9/9)
The LED lights up when the tool con-
nection function is switched on.
Silence kit button (option) (Fig. 9/10)
The silence kit button is used to switch
low-noise operation on and off. The si-
lence kit reduces the noise made by the
vacuuming equipment.
Tool connection button (option)
(Fig. 9/10)
The tool connection button is used to
switch operation of the spray and vacu-
um tool on and off.
21