Inserting The Sprint Mobile Broadband Usb Modem; Removing The Sprint Mobile Broadband Usb Modem - Sierra Wireless AirCard 595U User Manual

Inserting the Sprint Mobile Broadband USB Modem

To insert the Sprint Mobile Broadband USB modem into a notebook or desktop
computer:
Holding the Sprint Mobile Broadband USB modem by its sides, insert the
device into the USB slot of your computer.
Alternatively, you can attach the docking station to your computer's USB slot,
and insert the device into the docking station.
Note: If your computer's USB slot is vertical, use the docking station. Do not insert
the Sprint Mobile Broadband USB modem into a USB hub or a USB slot on a
keyboard.
When you insert the Sprint Mobile Broadband USB modem, the following should
occur:
The first time the device is inserted, Windows detects the device and installs
the drivers for it. This may take a few minutes. Once completed,
Sprint Connection Manager should display "Disconnected." To connect to the
network, click GO.
If sound effects are enabled, the PC beeps.
The Sprint Mobile Broadband USB modem is powered as soon as you insert it.

Removing the Sprint Mobile Broadband USB Modem

IMPORTANT!
To remove the Sprint Mobile Broadband USB modem:
1. Exit Sprint Connection Manager if it is open (page 44).
2. Remove the device from your computer's USB slot by gripping both sides of
the device and pulling straight out.
Section 2B: Inserting and Removing the Device
When inserting or removing your device, always grip the device by its
sides; this prevents damage to the device.
21