Sierra Wireless AirCard 595U User Manual page 72

The following table describes the options:
Menu Item
Always show
Welcome
Screens
GO
automatically
when ready
Enable NIC
for data
connections
Network
Mode:
Automatic
Network
Mode:
1xEV-DO
Only
64 Section 3C: Changing the Settings of Sprint Connection Manager
Description
Display a welcome screen upon a successful connection to the
network.
Automatically connect to the network after Sprint Connection
Manager starts, or whenever Sprint Connection Manager
loses the network connection.
To select GO automatically when ready, ensure that Enable NIC
for data connections (below) is not selected.
Tip: You can also set Sprint Connection Manager to start
automatically (see "Launch when Windows starts" on page 62).
These settings provide an "always-on" connection, as long as you
have network coverage.
You can have a connection established automatically, without
having to run Sprint Connection Manager. Ensure that
GO automatically when ready is not selected, and select Enable NIC for
data connections (below).
Make a connection automatically, without running
Sprint Connection Manager—simply by starting whatever
application you want to use (such as your Web browser or
email application).
To select Enable NIC for data connections, ensure that GO
automatically when ready (above) is not selected.
Note: Sprint Location Services are available only when
Sprint Connection Manager is running.
Attempt a Sprint Power Vision (1xEV-DO) connection and, if
not successful, attempt the slower Sprint Vision (1X)
connection.
Attempt only a Sprint Power Vision (1xEV-DO) connection.
Note: When in an area that has only Sprint Vision (1X) coverage, you
won't be able to connect to the network.