Sierra Wireless AirCard 595U User Manual page 54

To monitor the status of the connection, you can use the text (page 35) and icons
(page 33) in Sprint Connection Manager, and the icon in the system tray (page 39).
You can also view the amount of data transferred (page 48).
Tip: You can optionally specify which application to automatically launch when
the connection is established. (See "Auto-launch Upon Network
Connection" on page 47.)
You can also set the connection to launch automatically whenever
available. (See "GO automatically when ready" on page 64.) If you also set
Sprint Connection Manager to launch automatically (see "Launch when
Windows starts" on page 62), this can provide an "always-on" connection,
as long as you have network coverage.
You can have a connection established automatically—without running
Sprint Connection Manager—simply by starting whatever application you
want to use (such as your Web browser or email application). Select Enable
NIC for data connections (page 64). However, Sprint Connection Manager
and its icon in the system tray won't be available for you to monitor the
status of the connection. Sprint Location Services also won't be available.
Roam Guard
The Roam Guard feature, when enabled, displays a warning message if you are
roaming and a data connection is established or about to be established. The
message reminds you that roaming rates may apply.
From the window with the warning message, you can:
Turn off the warning message for this data session only ("Do not ask again
during this data session.").
Continue with the data connection ("Roam"), in which case you may be subject
to roaming rates.
End the data connection ("Cancel").
46 Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics