Maintenance - MasterCraft AIR-POWERED 2-IN-1 NAILER Instruction Manual

23

MAINTENANCE

REQUIRED
General inspection -
free movement
In-depth inspection
Replace worn or
broken parts
Lubrication
• Lubrication: If the Air-powered 2-in-1 Nailer and
the compressor are not equipped with an in-line
lubrication system, place up to 6 drops of pneu-
matic tool oil into the air inlet before each work
day or after every 2 hours of continuous use,
depending on the characteristics of the workpiece
and type of fasteners used.
DANGER!
Potential hazard that will result in serious injury or loss of life.
• Disconnect the tool from the air compressor before performing maintenance/
service, adjusting, clearing jams, reloading, and when it is not in use.
• Repairs must be performed by a qualified service technician only. Failure to
comply will lead to serious injury or loss of life.
DESCRIPTION
Trigger, spring,
safety mechanism
Worn or broken
parts
See below
AIR-POWERED 2-IN-1 NAILER 058-8548-4
MAXIMUM SERVICE INTERVAL
TOOLS OR
MATERIALS
Each Use or
REQUIRED
every 2 Hrs
None X
Pneumatic tool
X
oil
As
Monthly
Needed
X X
X
MC-588548-21