Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for MasterCraft 058-8179-2
Summary of Contents for MasterCraft 058-8179-2
- Page 1 INSTRUCTION MANUAL AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 2 QUICK START GUIDE TECHNICAL SPECIFICATIONS SAFETY GUIDELINES 4–9 KEY PARTS DIAGRAM IMPORTANT INFORMATION 11–13 TYPES OF NAILS OPERATING INSTRUCTIONS 15–20 MAINTENANCE 21–22 TROUBLESHOOTING 23–25 EXPLODED VIEW PARTS LIST 27–28 WARRANTY 29–30 AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 4 PERSONAL SAFETY These precautions are intended for the personal safety of the user and others working with the user. Please take time to read and understand them. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 5 MC-OM-02 Risk of electric shock: Do not expose a compressor to rain. Store it indoors. • Disconnect the compressor from the power source before servicing. Compressor must be grounded. Do not use grounding adaptors. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 6 Drain water from tank after each use. Do not weld or repair tank. Relieve all pressure in the hose before removing or attaching accessories. MC-OM-22 AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 7 Do not operate the compressor if it is not in a stable position. • Do not operate the compressor on a rooftop or an elevated position that could allow the unit to fall or be tipped over. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 8 Handling and storage of oil: Use with adequate ventilation. Avoid contact of oil with eyes, skin, and clothing. Avoid breathing spray or mist. Store the oil in a tightly closed container in a cool, dry, well-ventilated area free from incompatible substances. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 9 Note: Recycle unwanted materials rather than disposing of it as waste. Sort the tools, hoses, and packaging in specific categories and take to the local recycling center or dispose of it in environmentally safe way. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 10 MC-588179-01 Description Description Air inlet plug Safety stand Trigger Depth adjustment dial Magazine Selective actuation switch Magazine latch Air deflector Safety tip AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 11 GUIDELINES FOR PROPER USE AND OPERATION ® Be sure to use a proper air compressor with Mastercraft air-powered tools. The compressor should be able to supply a minimal air delivery of 4.7 SCFM @ 90 PSI to ensure the compressor can run ®...
- Page 12 For optimal performance, install a quick connector to the tool and a quick coupler on the hose, if applicable. • Verify that all connections in the air supply system are sealed in order to prevent air leakage. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 13 Read and follow all the safety instructions at the beginning of this manual. Inspect the Air-powered Coil Roofing Nailer prior to each use in order to: – ensure that the proper power source is being used. – verify that the tool is in proper working order. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 14 This Mastercraft® Coil Roofing Nailer drives full-head or round-head 3/4 to 1 3/4" (19 to 45 mm) long nails. The nails are to be collated at 15°. ACCEPTABLE NAILS (19 to 45 mm) Length: 3/4 - 1 3/4 Angle: 15°...
-
Page 15: Loading Nails
MC-588179-17 2. Grasp the nailer firmly with one hand and use the other hand to open the fig B magazine by operating the magazine latch (1) with the thumb and index finger (fig B) MC-588179-04 AIR-POWERED COIL ROOFING NAILER 058-8179-2... - Page 16 90 psi, attach fig F one end of the air hose to the compressor and the other end of the air (fig F) hose (1) to the tool (2) page 11 (wood density chart) MC-588179-08 AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 17 • Do not load different sized nails into the magazine, as doing so may cause nails to jam. Failure to comply could lead to serious injury or loss of life. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 18 3. If safety stand remains pressed 3. If the trigger remains pressed, successive against the workpiece, successive nails will fire each time the safety stand is nails will fire each time the trigger pressed against the workpiece. is pulled. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 19 (with the discharge direction (with the discharge area of the tool area of the tool facing away from the operator) (fig L) facing away from the operator) (fig K) fig L fig K MC-588179-13 MC-588179-14 AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 21 6 drops of pneumatic tool oil into the air inlet before each work day or after every 2 hours of continuous use, depending on the characteristics of the workpiece and type of nails used. MC-588179-20 AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 22 • Keep the magazine and the firing area of the tool clean and free of any dirt or abrasive particles. Note: When temperatures are below freezing, keep the tools warm using any safe, convenient method. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
-
Page 23: Troubleshooting
Air leakage between 2. The O-rings or the seals are worn 2. Inspect and replace the O-rings or the seals. the bottom and the or damaged. Have the tool serviced by a qualified service cylinder cap. technician. AIR-POWERED COIL ROOFING NAILER 058-8179-2... - Page 24 4. Clean the magazine. Air exhaust is being The direction of the air deflector directed towards the Direct the air deflector away from the operator. requires adjustment. operator. Note: For further repair information, please call 1-800-689-9928. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 25 AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 26 41 43 MC-588179-09 AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 27 O-ring 51 X 2.65 Pin 3 X 30 O-ring 50 X 3 Adjustable seat Collar Pin 2.5 X 22 O-ring 75 X 2.65 Spring Gasket Washer Gun body Pusher II Protection Adjusting screw Bumper Adjusting Nut AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 28 Spring Rubber grip Spring seat O-ring 3.6 X 3.55 Snap retainer End plate Air inlet plug Spring Plug cap If any parts are missing or damaged, or if you have any questions, please call 1-800-689-9928. AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 29 This warranty will not apply where damage is caused by repairs made or attempted by others (i.e., persons not authorized by the manufacturer). This warranty will not apply to any product that was sold to the original purchaser as a reconditioned or refurbished product (unless otherwise specified in writing). AIR-POWERED COIL ROOFING NAILER 058-8179-2...
- Page 30 This warranty gives you specific legal rights, and you may have other rights, which may vary from province to province. The provisions contained in this warranty are not intended to limit, modify, take away from, disclaim, or exclude any statutory warranties set forth in any applicable provincial or federal legislation. AIR-POWERED COIL ROOFING NAILER 058-8179-2...