Loading Staples; Loading Brad Nails - MasterCraft AIR-POWERED 2-IN-1 NAILER Instruction Manual

19

Loading brad nails

fig F
• Insert brad nails into the channel along
the left side of the magazine
WARNING!
Potential hazard that could result in serious injury or loss of life.
• The safety stand must be in contact with the workpiece before activating the
tool.
• Do not operate the tool if the fasteners are not loaded, as doing so may
damage the tool.
• Do not fire fasteners into the air, as doing so may cause injury to the
operators or others, apart from damaging the tool.
• Do not load different sized fasteners into the magazine, as doing so may
cause fasteners to jam. Failure to comply could lead to serious injury or loss
of life.
MC-588548-08
(fig F)
AIR-POWERED 2-IN-1 NAILER 058-8548-4

Loading staples

fig G
• Insert the staples from the top area of
. magazine with one 'arm' of the staple in
the centre slot of the magazine and the
other arm of the staple along the left side
of the magazine
MC-588548-09
(fig G)
.