MasterCraft 058-8691-0 Instruction Manual
  1. Manuals
  2. Brands
  3. MasterCraft Manuals
  4. Nail Gun
  5. 058-8691-0
  6. Instruction manual

MasterCraft 058-8691-0 Instruction Manual

Air-powered brad nailer
Hide thumbs Also See for 058-8691-0:

Advertisement

Table of Contents

See also: Operating Manual
INSTRUCTION MANUAL
AIR-POWERED
BRAD NAILER
058-8691-0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 058-8691-0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MasterCraft 058-8691-0

Summary of Contents for MasterCraft 058-8691-0

  • Page 1 INSTRUCTION MANUAL AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 2 QUICK START GUIDE TECHNICAL SPECIFICATIONS SAFETY GUIDELINES 4–9 KEY PARTS DIAGRAM IMPORTANT INFORMATION 11–13 TYPES OF FASTENERS OPERATING INSTRUCTIONS 15–19 MAINTENANCE 20–21 TROUBLESHOOTING 22–23 EXPLODED VIEW PARTS LIST 25–26 WARRANTY 27–28 AIR-POWERED BRAD NAILER 058-8691-0...

  • Page 4: Personal Safety

    PERSONAL SAFETY These precautions are intended for the personal safety of the user and others working with the user. Please take time to read and understand them. AIR-POWERED BRAD NAILER 058-8691-0...

  • Page 5: Safety Guidelines

    Disconnect the compressor from power source before servicing. Compressor must be grounded. Do not use grounding adaptors. Risk of personal injury: Do not direct compressed air from the air hose • toward the user or other personnel. AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 6 Drain water from tank after each use. Do not weld or repair tank. Relieve all pressure in the hose before removing or attaching accessories. MC-OM-22 AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 7 • Do not operate the compressor on a rooftop or in an elevated position that could allow the unit to fall or be tipped over. • Always replace a damaged gauge before operating the unit again. AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 8 • Disconnect tool from the air supply before loading or changing nails in order to prevent a nail from being fired during loading. Failure to comply may result in moderate injury or damage to equipment. MC-OM-21 AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 9 Note: Recycle unwanted materials rather than disposing of it as waste. Sort the tools, hoses, and packaging in specific categories and take to the local recycling center or dispose of it in an environmentally safe way. AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 10 MC-588691-01 Description Description Air inlet plug Quick release handle Magazine latch Depth adjustment dial Magazine Trigger Safety tip Air deflector AIR-POWERED BRAD NAILER 058-8691-0...

  • Page 11: General Use

    Compatible compressors GUIDELINES FOR PROPER USE AND OPERATION ® Be sure to use a proper air compressor with Mastercraft air-powered tools. The compressor that is being used must be able to supply appropriate amount of pressure (PSI) to the tool.

  • Page 12: Air System

    Failure to comply could lead to serious injury or loss of life. MC-588548-02 Description Description ® Mastercraft Air-powered Brad Nailer Regulator (0 to 8.5 bar) Quick connector Filter Quick coupler Cut-off valve Air hose Air compressor Lubricator AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 13 Do not attempt to clear a jammed nail when the air hose is connected. Do not drive a nail on top of an existing nail. Failure to comply could lead to • serious injury or loss of life. AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 14 This Mastercraft® Brad Nailer drives 18-gauge 5/8 - 2 (15 to 50 mm) long brad nails. " ACCEPTABLE NAILS (15 to 50 mm) Length: 5/8 - 2 " 2” 5/8” MC-588691-14 WARNING! Potential hazard that could result in serious injury or loss of life.

  • Page 15: Loading Nails

    fig A MC-588691-03 2. Hold the Air-powered Brad Nailer firmly with one hand, and use the other hand fig B to press the latch (1) on the magazine (fig B) (2) and slide it back MC-588691-04 AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 16 (1) before working on the workpiece. If the nails are being driven too deep or not deep enough, adjust the regulator in the air supply in order to provide more or less air pressure, as (fig E) required MC-588691-07 AIR-POWERED BRAD NAILER 058-8691-0...

  • Page 17: Firing Modes

    Potential hazard that may result in moderate injury or damage to equipment. • Operate the tool with the utmost care when it is connected to the air compressor. Failure to comply may result in moderate injury or damage to equipment. AIR-POWERED BRAD NAILER 058-8691-0...

  • Page 20: Maintenance

    6 drops of pneumatic tool oil into the air inlet before each work day or after every 2 hours of continuous use, depending on the characteristics of the workpiece and type of fasteners used. MC-588691-13 AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 21 • Keep the magazine and the safety stand of the tool clean and free of any dirt or abrasive particles. Note: When temperatures are below freezing, keep the tools warm using any safe, convenient method. AIR-POWERED BRAD NAILER 058-8691-0...

  • Page 22: Troubleshooting

    2. Inspect and replace the O-rings or the seals. cylinder cap. or damaged. 1. The bumper is worn. 1. Replace the bumper. The nails are being driven too deep. 2. The air pressure is too high. 2. Adjust the air pressure. AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 23 2. Inspect and replace the driver. worn. 3. The screw of the magazine is 3. Tighten the magazine. loosened. 4. There is dirt in the magazine. 4. Clean the magazine. Note: For further repair information, please call 1-800-689-9928. AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 24 60 61 56 58 MC-588691-11 MC-588489-08 MC-588691-11 AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 25 Bumper Fixed driver guide cover Sealing washer Bolt M5 x 25 Gun body Pin sleeve Guide stand Pin 3 x 26 Bolt M4 x 16 Washer II Quick release handle Compressed spring Movable driver guide cover AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 26 O-ring 36.3 x 3.55 Torsion spring End cap Pin 3 x18 Air inlet plug Fixed lever Air inlet plug cap If any parts are missing or damaged, or if you have any questions, please call 1-800-689-9928. AIR-POWERED BRAD NAILER 058-8691-0...
  • Page 27 This warranty will not apply where damage is caused by repairs made or attempted by others (i.e., persons not authorized by the manufacturer). This warranty will not apply to any product that was sold to the original purchaser as a reconditioned or refurbished product (unless otherwise specified in writing). AIR-POWERED BRAD NAILER 058-8691-0...

  • Page 28: Additional Limitations

    This warranty gives you specific legal rights, and you may have other rights, which may vary from province to province. The provisions contained in this warranty are not intended to limit, modify, take away from, disclaim, or exclude any statutory warranties set forth in any applicable provincial or federal legislation. AIR-POWERED BRAD NAILER 058-8691-0...

Table of Contents

Save PDF