MasterCraft 058-9816-0 Operating Manual
  1. Manuals
  2. Brands
  3. MasterCraft Manuals
  4. Nail Gun
  5. 058-9816-0
  6. Operating manual

MasterCraft 058-9816-0 Operating Manual

Air-powered coil roofing nailer
Hide thumbs

Advertisement

Table of Contents

model no. 058-9816-0
AIR-POWERED
COIL ROOFING NAILER
IMPORTANT :
For your own safety, read and follow all of the Safety Guidelines
and Operating Instructions before operating this nailer. Keep this
manual for future reference.
OPERATING
MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 058-9816-0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MasterCraft 058-9816-0

Summary of Contents for MasterCraft 058-9816-0

  • Page 1 058-9816-0 AIR-POWERED COIL ROOFING NAILER IMPORTANT : OPERATING For your own safety, read and follow all of the Safety Guidelines MANUAL and Operating Instructions before operating this nailer. Keep this manual for future reference.
  • Page 2 TABLE OF CONTENTS TECHNICAL SPECIFICATIONS SAFETY GUIDELINES KEY PARTS DIAGRAM TECHNICAL INFORMATION TYPES OF NAILS OPERATING INSTRUCTIONS MAINTENANCE TROUBLESHOOTING EXPLODED VIEW PARTS LIST WARRANTY...

  • Page 3: Technical Specifications

    058-9816-0 | contact us 1-800-689-9928 TECHNICAL SPECIFICATIONS SAFETY GUIDELINES This manual contains information that relates to PROTECTING PERSONAL SAFETY and LOADING CAPACITY 120 Nails (1 coil) PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully and understand it thoroughly before using the product.

  • Page 4: Safety Guidelines

    058-9816-0 | contact us 1-800-689-9928 SAFETY GUIDELINES Risk of burns: The pump and the manifold generate high temperatures. In order to avoid burns or other injuries, do not touch the pump, the manifold, Do not use oxygen or any other combustible or bottled or the transfer tube while the compressor is running.
  • Page 5 058-9816-0 | contact us 1-800-689-9928 CAUTION! Potential hazard that may result in injury or damage to equipment. Exhaust Cover Knob Disconnect the tool from the air supply and turn off the compressor before performing any maintenance, Nose Magazine...
  • Page 6 058-9809-8 | contact us 1-800-689-9928 Compatible compressors GUIDELINES FOR PROPER USE AND OPERATION Be sure to use a proper air compressor with Mastercraft ® air-powered tools. The compressor should be able to supply a minimal air delivery of 4.7 CFM @ 90 PSI to ensure the compressor can run continuously with the Mastercraft Air-powered Coil Roofing Nailer.

  • Page 7: Types Of Nails

    058-9816-0 | contact us 1-800-689-9928 model no. 058-9809-8 | contact us 1-800-689-9928 • It is recommended that a filter-regulator-lubricator be used and be located as close to the tool This Mastercraft ® Air-powered Coil Roofing Nailer drives 3/4 to 1 3/4" wire-collated coil nails.

  • Page 8: Model No. 058-9816-0 | Contact Us 1-800

    058-9816-0 | contact us 1-800-689-9928 model no. 058-9338 | contact us 1-800-689-9928 Loading nails 4. Place the nails in the magazine. Insert the Fig. A Fig. D Guide Surface first nail coil into the magazine opening. Driving Hole Guide Slot Uncoil enough nails to reach the driving hole.

  • Page 9: Model No. 058-9816-0 | Contact Us 1-800

    Before actually beginning the nailing work, test the nailer by using the check list below. Conduct the tests in the following order. If abnormal operation occurs, stop using the nailer and contact a service The Mastercraft® Air-powered Coiled Roofing Nailer has two firing modes: sequential fire for single firing, centre immediately.

  • Page 10: Adjusting The Nailing Depth

    058-9816-0 | contact us 1-800-689-9928 model no. 058-9809-8 | contact us 1-800-689-9928 4. Remove the contact trip valve seat components The installed sequential fire (single shot) mechanism is useful for when precision nail placement Fig. O (including plunger and plunger spring), and then is desired.
  • Page 11 058-9816-0 | contact us 1-800-689-9928 model no. 058-9809-8 | contact us 1-800-689-9928 Using the shingle guide Clearing a jammed nail The shingle guide can be used to control shingle spacing. To clear a jammed nail ① Disconnect air hose from nailer.
  • Page 12 058-9816-0 | contact us 1-800-689-9928 model no. 058-9809-8 | contact us 1-800-689-9928 INSPECTION Maintenance 1. Inspect the push lever and feeders. Disconnect air hose. ● TOOLS OR MAXIMUM SERVICE INTERVAL Clean the knob sliding part and lubricate it with pnenumatic tool lubricant.

  • Page 13: Piston 1

    058-9809-8 | contact us 1-800-689-9928 model no. 058-9816-0 | contact us 1-800-689-9928 PROBLEM POSSIBLE CAUSES SOLUTIONS The following chart lists common issues and solutions. Please read it carefully and Verify that the air supply is adequate. The air supply is inadequate.
  • Page 14 058-9816-0 | contact us 1-800-689-9928 O-ring 47 x 2.4 Feeder Body assembly (includes 37) Feeder shaft O-ring 43.5 x 2.65 Feeder shaft ring Piston bumper Shaft ring 105 106 Bumper sheet Nail guide shaft Housing gasket Adjuster Bolt M5 x 8...
  • Page 15 058-9816-0 | contact us 1-800-689-9928 model no. 058-9809-8 | contact us 1-800-689-9928 3-Year Limited Warranty This warranty will not apply to any product or part thereof if any part from another manufacturer is installed therein or any repairs or alterations have This product is guaranteed for a period of 3 years from the date of original retail purchase been made or attempted by unauthorized persons.

Table of Contents

Save PDF