MasterCraft AIR-POWERED 2-IN-1 NAILER Instruction Manual page 18

3. Insert a strip of fasteners into the
magazine. Be sure that the points of the
fasteners are facing down. Close the
(fig C)
magazine (1)
(see nail type icon on page 16)
4. Plug in compressor, turn it on, and set
the pressure regulator to 90 PSI, attach
one end of the air hose to the
compressor and the other end of the air
hose (1) to the tool (2). Use plumber's
tape to avoid air leak
"Technical specifications") (fig D)
page 12 (wood density chart)
5. Test the driving depth of the fasteners
on sample piece of wood by pressing
the trigger (1) before working on the
workpiece. If the fasteners are being
driven too deep or not deep enough,
adjust the regulator in the air supply in
order to provide more or less air
pressure, as required
.
(see section
.
(fig E)
.
AIR-POWERED 2-IN-1 NAILER 058-8548-4
fig C
fig D
2
fig E
1
18
1
MC-588548-05
1
MC-588548-06
MC-588548-07