Vision Fitness X70 Owner's Manual page 6

aSSemBlY
it is recommended, when possible, that an authorized Vision Fitness
retailer assemble your elliptical trainer. if you have elected to assemble this
product yourself, for your safety please read and follow each of the steps
in the enclosed assembly instructions. if you have any questions regarding
any part or function of your elliptical trainer, contact your retailer.
moViNG
Your Vision Fitness elliptical trainer has transport wheels included for
ease of mobility. to move, firmly grasp the rear of the frame assembly.
Carefully lift and roll on the transport wheels.
caUTioN:
our elliptical trainers are well-built and heavy, weighing up to
340 pounds! Use care and additional help if necessary.
6
STaBiliZiNG THe elliPTical TraiNer
After positioning the elliptical
trainer in its intended location,
check the unit's stability. Rocking
or wobbling indicates that your
elliptical trainer needs to be
leveled. Determine which leveler
is not resting completely on the
floor. Loosen the nut at the base of
the leveler to allow the leveler to
rotate. now rotate the leveler to the
left or right until the elliptical trainer
is stable. Lock the adjustment by
tightening the nut against the rear
foot support.
SelF-PoWereD FeaTUre
the X70 is self-powered, requiring no external power source. When a
user strides at a speed above 40 strides per minute (sPM), the power is
generated to allow the elliptical trainer to function properly. Because of
this self-generating feature, the console feedback will fade away when
you cease pedaling. the console does, however, use a 9-volt battery as
backup to save your feedback information for 30 seconds from the time
you stopped striding. if you resume striding within the 30 seconds, the
information will reappear. if the information does not appear within the 30
seconds, your battery may need to be plugged in or replaced.
7