Vision Fitness X70 Assembly Manual

Commercial elliptical trainer

Hide thumbs Also See for X70:

Download this manual See also: Service Manual, Owner's Manual

Enlarged version

TO OL S & PARTS I NCL UDE D

6mm T-Shaped Wrench

Screwdriver

5mm T-Shaped Wrench

PARTS BOX

Power Cord

Console Mast Bracket

Console Mast Cover

Accessory Tray

Color-coded Hardware Bags

Owner's Guide

Assembly Guide

Warranty Card

13mm Wrench

10mm T-Shaped Wrench

17mm Wrench

8mm L-Shaped Wrench

500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551

toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373

www.visionfitness.com

AG18.52PRD

REV4

A s s e m b l y

G u i d e

X70

COMMERCIAL ELLIPTICAL TRAINERS

Need help?

Do you have a question about the X70 and is the answer not in the manual?

Page 1 Color-coded Hardware Bags toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373 Owner’s Guide www.visionfitness.com Assembly Guide Warranty Card 2008 Vision Fitness. All Rights Reserved. 3.08 AG18.52PRD REV4 13mm Wrench A s s e m b l y 17mm Wrench...
Page 2 COMMERCIAL ELLIPTICAL TRAINERS To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your new Elliptical Trainer’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Elliptical Trainer.
Page 3 Console Mast ORA N GE B AG STEP • Place the console mast boot on the end of the console mast. • Connect the wire tie that exits the bottom of the console mast to the wire harness that sits in the bracket at the top of the frame.