Vision Fitness X6600HRT Assembly Manual
Commercial elliptical trainer
Hide thumbs
Also See for X6600HRT:
- Owner's manual (52 pages) ,
- Assembly manual (8 pages) ,
- Owner's manual (44 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Vision Fitness X6600HRT
Summary of Contents for Vision Fitness X6600HRT
- Page 1 A s s e m b l y G u i d e X6600HRT COMMERCIAL ELLIPTICAL TRAINER...
- Page 2 A s s e m b l y G u i d e X6600HRT COMMERCIAL ELLIPTICAL TRAINER To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your new Elliptical Trainer’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
- Page 3 TOOLS & PARTS INCLUDED Allen Wrench Allen Wrench Screwdriver L-Shaped Wrench L-Shaped Wrench Socket Wrench PARTS BOX Console Mast Cover, Qty: 1 Water Bottle & Cage, Qty: 1 Heart Rate Chest Strap, Qty:1 Link Arm Covers, Qty: 2 Pedal Support Brackets, Qty: 2 Dual Action End Caps, Qty: 2 Color-coded Hardware Bags Owner’s Guide...
-
Page 4: Hardware Included
HARDWARE INCLUDED ORANGE BAG BLUE BAG M10x70L CapScrew M8x10L Screw Quantity: 2 Quantity: 4 M20x30x1.5T Wavy Washer Quantity: 2 M8x80L SocketHead CapScrew Quantity: 1 M8x15L Screw Quantity: 2 FOR SERVICE ONLY L-Shaped Wrench PINK BAG M5.3x10x1T Washer Quantity: 4 M8x30L CapScrew Quantity: 8 M49x7 Round Tool M5x12L Screw... - Page 5 ORANGE BAG STEP • Place the rubber console mast boot on the end of the console mast. • Connect the wire tie that exits the bottom of the console mast to the wire harness that sits in the bracket at the top of the frame.
- Page 6 BLUE BAG STEP • Place wavy washer (M20x30x1.5t) on the axle located under the foot plate of the right lower link arm. • Slide the axle of the lower link arm into the bracket located on the top of the right pedal arm. Secure lower link arm by attaching the pedal support bracket and screw (M8x15L) to the end of the axle.
- Page 7 PINK BAG STEP • Connect the right dual-action arm to the right console mast rotation housing, being sure to line up the holes. Secure the dual action arm in place with four screws (M8x30L) and tighten with a 6 T-handled Allen wrench.
- Page 8 Phillips screwdriver. Insert the water bottle. 500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www.visionfitness.com 2002 Vision Fitness. All Rights Reserved. 12.02 Part #Z66EP35-AG1820PRD AG18.20PRD REV2...