X 6 0 0 0 X 6 2 0 0 H R T elliptical trainers To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding though, find your new Elliptical Trainer’s serial number, located on the front foot axle tube, and enter here: Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records.
Page 3
Toe Pieces, Qty: 2 L-Shaped Wrench Rear Wheels, Qty: 2 Console, Qty: 1 Tension Control Knob, Qty: 1 (X6000 only) Power Supply, Qty: 1 (X6200HRT only) Water Bottle & Bracket, Qty: 1 Heart Rate Chest Strap, Qty: 1 (X6200HRT only) Other Parts Bags Owner’s Guide...
Page 5
(M5) bolts (M5 x 25 STEP X6000 Only BLUE BAG STEP • Slide the front foot axle into the plastic sleeve of the front foot. Place a wavy washer (16 x 29 x 1.5) on each end of the axle.
Page 6
PINK BAG STEP • X6000 only: Unfold the RPM sensor wire, located in the frame console mast bracket. Remove any kinks. • All models: Slide the rubber console mast cover onto the bottom of console mast, and slide it up as far as it will STEP •...
Page 7
621-D East Lake Street • P.O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www.visionfitness.com 2001 Vision Fitness. All Rights Reserved. 5.01 Part #Z60EP19-AG1804PRD AG18.04PRD U.S. Patent No. 6,190,289 REV2...