Wps; Station List - NetComm Liberty series User Manual

WPS

WPS is the simplest way to establish a connection between wireless clients and your 3G Router. this method removes the need to
manually select the encryption mode and fill in the passphrase. You only need to press a button on both wireless client and wireless router,
and the WPS will do the rest for you. the wireless router supports two types of WPS:
Name
WPS via Push Button
WPS via PIN code
Name
WPS:
WPS Current Status:
WPS SSID:
WPS Auth Mode:
WPS PIN:
WPS Mode:

Station List

the Station List shows the wireless clients currently associated with your 3G Router.
NetComm Liberty Series 3G Wireless N150 Wireless Router
30
Description
You have to push a specific button on the wireless client or in your wireless client utility
to start the WPS mode, and switch the wireless router to WPS mode. You can simply
push the WPS button of the wireless router, or click the 'Start Process' button in the web
configuration interface
You have to know the PIN code of the wireless client and switch it to WPS mode, then
input the wireless client PIN to the wireless router web interface.
Description
Use the dropbox to either enable or disable the WPS function.
If the wireless security (encryption) function of this wireless router is properly set, you will
see a 'Success' message here. Otherwise, you will see 'Idle'.
This is the network broadcast name (SSID) of the router.
It shows the active authentication mode for the wireless connection.
this is the WPS PIN code of the wireless router. You may need this information when
connecting to other WPS-enabled wireless devices.
Select either PIN or PBC.
YmL1�WN YmL1�WN 1�WN
www.netcomm.com.au