System Function Control - Panasonic WV-CU650 Operating Instructions Manual

1. Select a desired monitor. (Refer to p. 32 Monitor
Selection.)
2. To toggle the OSD information, press the OSD button.
Note: OSD information differs depending on system
units. Refer to the operating instructions of system
units.

■ System Function Control

You can recall system functions (functions of system units)
by pressing the corresponding function numbers. Refer to
the operating instructions of system units for the association
of function numbers and system functions.
Mon01 Cam001
F1
1. Select a system unit and monitor. (Refer to p. 31
System Unit Selection and p. 32 Monitor Selection.)
2. Enter a function number by pressing the numeric but-
tons.
3. Press the CAM FUNC/SYS FUNC button while holding
down the SHIFT button.
The associated system function will be activated.
Note: If you assign system functions to the joystick function
buttons (A, B, and top buttons), you can recall system
functions by pressing these buttons. Refer to p. 47
MENU FUNCTION DESCRIPTIONS for details.
34
____3
F2 F3 F4