Before Operation; Power-On; Power-Off - Panasonic WV-CU650 Operating Instructions Manual

BEFORE OPERATION

■ Power-on

Before operation, confirm
Depending on system composition, some functions may be
unavailable.
1. Plug the supplied AC adapter into an AC 120 V out-
let.
2. Insert the DC 9 V plug into the DC 9V Input Jack at
the rear panel.
AC outlet
AC adapter
DC 9V plug
The power will be turned on. Then, the OPERATE indi-
cator will light up. and the software version → controller
number → login standby display will appear on the
LCD.
Power is turned on.
Ver.1.00
Software version appears.
PS·Data Mode
CU Unit No.1
Controller number appears.
PS·Data Mode
No User
Login standby display appears.
the system composition.
Clamp
(Fastens the supplied
AC adapter's
power cord.)
DC9V IN
DC 9V Input Jack
(Lighting for 2.0 seconds)
(Lighting for 1.0 second)
(Lighting until login)

■ Power-off

After operation, power off the system controller as follows.
1. Log out from the system. (Refer to p. 30.)
2. Unplug the AC adapter from the AC outlet.
The power will be turned off. Then, the OPERATE indi-
cator will go out.
When leaving away from the system controller
for a long time
Log out of the system and unplug the AC adapter from the
AC outlet. If the AC adapter is kept plugged into the AC
outlet, the adapter will consume electricity even after the
DC 9 V plug is removed from the DC 9V Input Jack.
27