Panasonic WV-CU650 Operating Instructions Manual page 61

Display pattern
DD/MM/YYYY HH:MM 24
MM/DD/YYYY HH:MM 24
DD/Mmm/YYYY HH:MM 24
YYYY/MM/DD HH:MM 24
Mmm/DD/YYYY HH:MM 24
DD/MM/YYYY HH:MM 12
MM/DD/YYYY HH:MM 12
DD/Mmm/YYYY HH:MM 12
YYYY/MM/DD HH:MM 12
Mmm/DD/YYYY HH:MM 12
* 1 Factory default for U.S. models
* 2 Factory default for Europe models
Note: In this diagram, "12" means 12 hour display and
"24" means 24 hour display.
3. Press the ENTER or CAM (SET) button.
"Set OK?" will appear on the LCD.
Time&Date Type
Type0
Note: To cancel the setting, press the EXIT or MON
(ESC) button.
4. Press the ENTER or CAM (SET) button again.
The display pattern will be set.
"Memory" will appear on the LCD for a few seconds,
and the LCD display will return to Step 1.
Time&Date Type
Type0
● Auto Login/Logout Setup
If auto login or auto logout is activated, operators can log
into or log out of the system automatically.
Note: You cannot set both Auto Login and Auto Logout to
ON for the same system controller.
1. Display "Auto Login" sub menu. (Refer to Step 1 to 4 of
p. 51 To Recall Menu Functions.)
Auto Login/out
Cont No.1 Off
2. Select a system controller to activate auto login or auto
logout by performing either of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Auto Login/out
Cont No.6 Off
Note: The factory default is "Cont No. 1".
Display Example
21/08/2001 22:55 24 * 2
08/21/2001 22:55 24
21/Aug/2001 22:55 24
2001/08/21 22:55 24
Aug/21/2001 22:55 24
21/08/2001 10:55 12
08/21/2001 10:55 12
21/Aug/2001 10:55 12
2001/08/21 10:55 12
Aug/21/2001 10:55 12 *
402
Set OK?
402
Memory
403
403
3. Rotate the shuttle ring clockwise or move the 3D joy-
stick to the right.
4. To activate auto login, select an operator
(Operator 1 to 16) by performing the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Auto Login/out
Cont No.6 Operator16
1
To activate auto logout, select the duration until auto
logout (Logout 5 to 120)* by performing the following.
* The numbers mean minutes.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Auto Login/out
Cont No.6 Logout 30
Notes:
• Parameters can be changed as follows.
Operator 1 → Operator 2 ...→ Operator 16 → Logout
5 → Logout 10 ...→ Logout 120 → Operator 1 ...
• To return the cursor to Cont No. n, rotate the shuttle ring
counterclockwise or move the 3D joystick to the left.
• Auto Logout setting will be activated after you log
into the system again.
5. Press the ENTER or CAM (SET) button.
"Set OK?" will appear on the LCD.
Auto Login/out
Cont No.6 Set OK?
Note: To cancel the setting, press the EXIT or MON
(ESC) button.
6. Press the ENTER or CAM (SET) button again.
Auto login will be set.
"Memory" will appear on the LCD for a few seconds,
and the LCD display will return to Step 1.
Auto Login/out
Cont No.6 Memory
To deactivate auto login or auto logout
1. Select a system controller to deactivate auto login or
auto logout by performing either of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Auto Login/out
Cont No.6 Operator16
Auto Login/out
Cont No.6 Logout 30
403
403
403
403
403
403
61