Panasonic WV-CU650 Operating Instructions Manual page 125

The following commands have been newly added. These commands are available only while Digital Disk Recorder WJ-HD300
Series are being connected to the unit.
Recorder Control
Item
Disk selection
A - B repeat playback
Filtering ON/OFF
MARK
GO TO LAST
WJ-HD300 Series OSD dis-
play ON
(Refer to WJ-SX150A
Operating Instructions for WJ-
SX150A OSD ON/OFF.)
DATA COPY window ON
Text display ON
List/Thumbnail
Transmission Command
(ASCII)
CMD:RmmDSn
CMD:RmmRPn
CMD:RmmLTn
CMD:RmmMP
CMD:RmmPM
CMD:RmmDI
CMD:RmmPD
CMD:RmmDT
CMD:RmmTN
Response (ASCII)
ANS:RmmDS
ANS:RmmRP
ANS:RmmLT
ANS:RmmMP
ANS:RmmPM
ANS:RmmDI
ANS:RmmPD
ANS:RmmDT
ANS:RmmTN
Parameter (ASCII)
mm=Monitor No.
n=0 HDD normal/event recording sector
n=1 HDD copy sector
n=2 Disk connected to COPY 1
n=3 Disk connected to COPY 2
n=0 A - B repeat playback OFF
n=1 Set repeat start point (A point)
n=2 Set repeat end point (B point)
mm=Monitor No.
n=0 OFF
n=1 ON
mm=Monitor No.
mm=Monitor No.
mm=Monitor No.
Setup control commands are available.
(Refer to WJ-SX150A
Instructions.)
mm=Monitor No.
Setup control commands are available. (Refer
to WJ-SX150A Operating Instructions.)
mm=Monitor No.
Setup control commands are available.
(Refer to WJ-SX150A Operating Instructions.)
mm=Monitor No.
Transmission command displays list or
thumbnail alternately.
Operating
47