Panasonic WV-CU650 Operating Instructions Manual page 62

2. Press the CLEAR button.
"Clear OK?" will appear on the LCD.
Auto Login/out
Cont No.6 Clear OK?
Note: To cancel deactivating auto login, press the EXIT
or MON (ESC) button.
3. Press the ENTER or CAM (SET) button.
Auto login or auto logout will be deactivated.
"Erased" will appear on the LCD for a few seconds, and
the LCD display will return to Step 1.
Auto Login/out
Cont No.6 Erased
● Operator Registration or Change
You can register new operators or change the parameter
settings. Up to 16 operators are registrable in the system.
Notes:
• Refer to p. 29 Operation Start (Login) for the factory
default.
• To return to the previous step, press the EXIT or MON
(ESC) button.
1. Display "Operator Setup" sub menu. (Refer to Step 1 to
4 of p. 51 To Recall Menu Functions.)
Operator Setup
Operator01
2. Select an operator to register or change the settings by
performing either of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Operator Setup
Operator02
Note: When registering a new operator, select an oper-
ator number beside which "No Assign" is displayed.
Operator Setup
Operator07 No Assign
3. Press the ENTER or CAM (SET) button.
"User ID" setting menu will appear on the LCD.
Operator07
User ID=
62
4. Enter a user ID by pressing the numeric buttons.
403
5. Press the ENTER or CAM (SET) button.
403
6. Enter a password by pressing the numeric buttons.
7. Press the ENTER or CAM (SET) button.
8. Set the function level by performing either of the follow-
404
404
404
9. Press the ENTER or CAM (SET) button.
404
1
"1" to "99999" are available for the user ID number.
Operator07
User ID=
Note: If you have entered a wrong user ID, press the
CLEAR button.
The password entry form will appear on the LCD.
Operator07
Password=
"1" to "99999" are available for the password.
Operator07
Password=
Note: If you have entered a wrong password, press the
CLEAR button.
"Function Level" setting menu will appear on the LCD.
Operator07
Function Level
ing.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Operator07
Function Level
Notes:
• Refer to p. 63 Function Level Setting for details on
function level.
• You cannot change the function level of Operator 1.
If you try to change, "Level 1 Fixed" will appear on
the LCD.
Operator01
Level1 Fixed
"Camera Level" setting menu will appear on the LCD.
Operator07
Camera Level
404
777
404
12345
404
333
404
= 1
404
= 2
404
404
= 1