Lcd Display Descriptions - Panasonic WV-CU650 Operating Instructions Manual

■ LCD Display Descriptions

The following are examples of LCD display after login.
Note: Some parts of LCD displays, described on this document, may differ from the actual status.
● Default Status (LCD Display After Login)
q Monitor number
The number of connected monitor is displayed. 1 to 99
can be displayed as a monitor number.
w Camera number
• The number of connected camera is displayed. 1 to
999 can be displayed as a camera number.
• When a camera position is specified, the camera posi-
tion number is displayed.
• When a sequence is activated for a connected system
unit, "Seq" is displayed.
e Model number/Unit number
• The model number of connected system unit is dis-
played. When you select a system unit, the unit number
of connected system unit is displayed. The following
are examples of model number display.
"HD500": Digital Disk Recorder WJ-HD500 Series
"SX150A": Matrix Switcher WJ-SX150A
Note: The model number is abbreviated when an actual
model number exceeds 6 characters.
Mon02 Cam016
F1 F2 F3
HD316
F4
• When you press the RECORDER/UNIT button, the unit
number of connected system unit appears. 1 to 99 can
be displayed as a unit number.
• Numerics you have entered are displayed on this area.
r Function number (F1 to F8)/LCD title
• In the factory default, function numbers "F1" to "F4" are
displayed. "F5" to "F8" are displayed while holding
down the SHIFT button.
• The LCD titles, assigned to function buttons (F1 to
F4/F5 to F8), can also be displayed. You can edit the
function names in up to 20 alphanumeric characters.
You can display F5 to F8 function names while holding
down the SHIFT button.
13