Basic Operation Flow; Lcd/Buzzer Adjustment - Panasonic WV-CU650 Operating Instructions Manual

■ Basic Operation Flow

System Unit Selection
System Unit
Setup and Operation

■ LCD/BUZZER Adjustment

You can perform the settings of LCD brightness, LCD con-
trast, alarm buzzer, or button buzzer as follows.
1. Press the ADJUST button to select a desired menu.
Every pressing the button will display the brightness
setting menu → contrast setting menu → alarm buzzer
setting menu → button buzzer setting menu inter-
changeably.
Note: If no adjustment has been performed for 5 sec-
onds or more, these setting menus will automatical-
ly disappear and the LCD will return to the default
status.
2. After adjustment, press the MON (ESC) or EXIT but-
ton.
The LCD display will return to the default status.
● Brightness Level Adjustment
You can change the brightness level by rotating the
JogDial.
Adjust the LCD brightness level while watching the LCD.
LCD Bright
28
Login
Monitor Selection
Camera Selection
Camera setup
and control
Logout
14
Unit selection
Monitor
selection
Camera
selection
Note: 1 (lowest) to 20 (highest) are available. The factory
default is 14.
● Contrast Level Adjustment
You can change the contrast level by rotating the JogDial.
Adjust the contrast level while watching the LCD.
LCD Contrast
Note: 1 (highest) to 20 (lowest) are available. The factory
default is 9.
● Alarm Buzzer Setting
You can change the duration time of alarm buzzer sound
by rotating the JogDial. Adjust the alarm buzzer setting
while watching the LCD.
Buzzer Alarm
Note: OFF, 1s (second), 2s, 3s, 4s, ..., 30s, 40s, 50s, and
60s are available. The factory default is 2s.
Login
Operation
(Multiscreen segment
switching and sequence
Operation
(Panning, Tilting,
and zooming, etc.)
Logout at the
end of
operation
9
2s