Contrast Automatic Adjustment Display - Panasonic AKHCU200 Operating Instructions Manual

Picture monitor (PM) displays
*1: [AUTO NG1 detailed information]
The AUTO NG1 detailed information is displayed flashing on the screen .
Rch OUT RANGE
Gch OUT RANGE
Bch OUT RANGE
AWB LOW LIGHT
AWB HIGH LIGHT
*2: [AUTO SETUP operation information]
The AUTO SETUP operation information is displayed on the screen .
B .SHD OPERATION
FLARE OPERATION
ABB OPERATION
AWB OPERATION
*3: [AUTO NG2 detailed information]
The AUTO NG2 detailed information is displayed flashing on the screen .
ABB Gch OUT RANGE
ABB Bch OUT RANGE
ABB Rch OUT RANGE
B .SHD Gch OUT RANGE
B .SHD Bch OUT RANGE
B .SHD Rch OUT RANGE
FLARE Gch OUT RANGE
FLARE Bch OUT RANGE
FLARE Rch OUT RANGE
AWB Gch OUT RANGE
AWB Bch OUT RANGE
AWB Rch OUT RANGE
NOT RUNNING
ILLEGAL MODE(CINEGAMMA)
NOT RUNNING
ILLEGAL MODE(D .EXT)
NOT RUNNING
ILLEGAL MODE(SCANREVERSE)
NOT RUNNING
ILLEGAL MODE(BAR)
NOT RUNNING
ILLEGAL MODE(TESTSAW)
8
(Continued)
z Contrast automatic adjustment display
z
This appears when contrast automatic adjustment (DRS SWITCH) is set
to ON by ROP operation .
z For details on contrast automatic adjustment, refer to the Operating
z
Instructions for the ROP .
<DR S ON >