Cleaning The Registration Roller; Cleaning The Main Charger Wire - Kyocera Mita Ecosys FS-1010 Service Manual

(1) Cleaning the registration roller

Use the supplied wiper cloth 1 to clean dust and dirt away from the registration roller 2 (metal).
2
1
Figure 3-1-5 Cleaning the registration roller

(2) Cleaning the main charger wire

Slide the charger cleaner knob (green colored) back and forth 2 to 3 times, then return it to its
[CLEANER HOME POSITION].
1
1
Figure 3-1-6 Cleaning the main charger wire
After cleaning is done, install the process unit in the printer, using the reverse manner as above.
Close the front cover and top cover.
FS-1010
3-8