Error Messages - Kyocera Mita Ecosys FS-1010 Service Manual

Indicator Remote Operation Panel display
(No
Warning
indication
low memory
patterns
available)
Warning waste
toner box

Error messages

Indicator Remote Operation Panel display
File not found
Press GO
KPDL Error
Press GO
MemoryCard err##
Press GO
Memory overflow
Press GO
FS-1010
The printer's memory is running low
because of the number of downloaded
fonts and macros.
Print a status page to see how much user
memory is left and try deleting
unnecessary fonts and macros.
The waste toner reservoir is almost full.
The waste toner reservoir will become
full and the printer will stop printing.
The specified file is not found. Press the
Go key to resume printing. You can
abandon printing by pressing the Cancel
key.
Current print processing cannot
continue.
Press the Go key to resume printing.
You can abandon printing by pressing
the Cancel key.
An error has occurred during access to
the memory card using the
PRESCRIBE RWER command or from
the Remote Operation Panel utility.
Look at the error code given in place of
## and refer to the corresponding
description given below.
04: The capacity of the memory card is
insufficient. Clean up files.
05: Specified file not on memory card.
06: No memory for use by memory
card. Expand printer memory.
Press the Go key to resume printing.
You can abandon printing by pressing
the Cancel key.
Printing cannot continue because there
is not enough memory.
Try adding more memory. Press the Go
key to resume printing.
You can abandon printing by pressing
the Cancel key.
6-8
Description
Description