Removing The Main Charger Unit - Kyocera Mita Ecosys FS-1010 Service Manual

5-2-10 Removing the main charger unit

1. Remove the process unit from the printer (See page 5-4).
2. Unlatch the three snaps 1, and remove the main charger cap 2.
3. Draw the main charger unit 3 in the direction of arrow A, then pull it out in the direction of
arrow B.
3
When refitting the main charger unit 3, hold terminal 4 down C, then push
CAUTION
frontwards. Use care not to deform the terminal 4.
FS-1010
B
C
3
5-2-29 Removing the main charger unit
4
5-32
A
1
1
2