Removing The Principal Circuit Boards; Removing The Engine Board - Kyocera Mita Ecosys FS-1010 Service Manual

5-2-6 Removing the principal circuit boards

(1) Removing the engine board

1. Remove the top cover/face-down output tray and right cover (See pages 5-5 and 5-6).
2. Remove all (ten) connectors from the engine board 1.
3. Remove three screws 2.
4. Remove the engine board 1.
2
1
Figure 5-2-10 Removing the engine board
5-11
FS-1010