Kyocera Mita Ecosys FS-1010 Service Manual page 89

6. Remove one screw 5.
7. Remove the toner sensor 6 and spring 7.
8. Remove two screws 8.
9. While pressing the latch 9 by using the driver and then remove the MP feed unit 0.
6
5
8
7
8
9
0
Figure 5-2-7 Removing the MP feed unit
10. Remove the stop ring ! and then remove the MP feed roller @.
!
@
Figure 5-2-8 Removing the MP feed roller
FS-1010
5-9