[ 11 ] Downloading/Uploading The System Message File - Denso BHT-8000 User Manual

[ 11 ] Downloading/Uploading the System Message File
The system message file (named "_B80MSG.FN3") stores system messages, e.g., "Shutdown in
progress. Do not remove the battery." and "Charge the battery!."
The SYSTEM MESSAGE transfer menu allows you to upload or download the system message file
to/from the host computer.
If you select the "2:UPLOAD," the system will set up the system message file based on the current
settings and upload it to the host computer. After that, the created file will be deleted.
If you select the "1:DOWNLOAD," the BHT will receive the system message file from the host computer
and apply the stored messages. After that, the received file will be deleted.
For uploading/downloading, the BHT will use the communications parameters, communications protocol,
and interface port specified in Subsection 2.5.3, "[4.5] Setting the communications environments."
Usually you do not need to use this SYSTEM MESSAGE transfer menu since system messages have
been set at the time of delivery from the factory.
SYSTEM MESSAGE transfer menu
[11.1] Downloading the system message file
⇓
Pressing the 6 key while holding down the SF key on the SYSTEM
MENU calls up the screen shown at left.
[1] DOWNLOAD: Downloads the system message file to the user
[2] UPLOAD:
Select a desired item by using the numerical keys or F5 and F6, then
press the ENT key.
Press the C key to return to the SYSTEM MENU.
Selecting "1:DOWNLOAD" on the SYSTEM MESSAGE menu calls
up the screen shown at left. With this screen displayed, the BHT waits
for the system message file to be downloaded.
Chapter 2 Getting Started the BHT and System Mode
area of the BHT.
Uploads the system message file stored in the
BHT.
85