Denso BHT-8000 User Manual page 68

[4.1] Setting an execution program
[4.2] Setting the message version and system status indication
Selecting "1: EXECUTE PROGRAM" on the SET SYSTEM menu
calls up the screen shown at left.
Highlighted is the current setting.
Use the F5 and F6 keys to move the cursor to a desired execution
program to be run automatically when the power is applied, and then
press the ENT key.
To return to the SET SYSTEM menu, press the C key.
If no program files are stored in the memories, the screen shown at
left will appear.
To return to the SET SYSTEM menu, press the C key.
Selecting "2: DISPLAY" on the SET SYSTEM menu calls up the
screen shown at left.
Highlighted is the current setting.
[1] MESSAGE: Switches the message version to English or
[2]STATUS:
Select a desired item by using the numerical keys or F5 and F6 keys,
then select a desired setting by using the F7 and F8 keys.
Press the ENT key.
To return to the SET SYSTEM menu, press the C key.
You may turn the system status indication on or off also by using
the OUT statement in user programs. Refer to the "BHT-BASIC
Programmer's Manual."
Japanese for system error messages and
indications on the LCD contrast, beeper volume,
beeper & vibrator switching, and battery voltage
level screens. (The default is the message version
that you selected in the initializing sequence.)
Turns the system status indication on or off. If it is
set to on, the shift key icon and alphabet entry mode
icon may appear as shown on the next page.
52