Denso BHT-8000 User Manual page 96

[9.1] Downloading the BHT system parameter file
⇓
⇓
If an error occurs during downloading
If some error occurs during downloading, the BHT beeps three times and shows one of the following
screens with the prompt "Retry?"
To retry the download, press the 1 and ENT keys; to abort it, press the 2 and ENT keys.
To return to the SYSTEM PARAMETER transfer menu, press the C key.
Selecting "1:DOWNLOAD" on the SYSTEM PARAMETER transfer
menu calls up the screen shown at left. With this screen displayed,
the BHT waits for the BHT system parameter file to be downloaded.
While the downloading operation is in progress, the screen shown at
left is displayed indicating the file name and the number of received
records/the total number of records.
To abort the downloading operation, press the C key. The screen will
switch back to the SYSTEM PARAMETER transfer menu.
Upon completion of downloading, the BHT displayed the screen
shown at left and beeps once.
Press the C key to return to the SYSTEM PARAMETER transfer
menu.
Problem
The memory is insufficient for storing the BHT system parameter file
to be downloaded.
Solution
Press the 2 key to return to the SYSTEM MENU, then delete
unnecessary files in the memory. (Refer to Subsection 2.5.3, [ 7 ].)
80