Denso BHT-8000 User Manual page 104

[11.2] Uploading the system message file
⇓
⇓
If an error occurs during uploading
If some error occurs during uploading, one of the following screens will appear and the beeper beeps
three times.
To retry the uploading operation, press the 1 and ENT keys; to abort it, press the 2 and ENT keys.
Press the C key to return to the SYSTEM MESSAGE transfer menu.
Selecting "2:UPLOAD" on the SYSTEM MESSAGE transfer menu
calls up the screen shown at left. With this screen displayed, the BHT
waits for the system message file to be uploaded.
While the uploading operation is in progress, the screen shown at left
is displayed indicating the file name and the number of sent
records/the total number of records.
To abort the uploading operation, press the C key. The screen will
switch back to the SYSTEM MESSAGE transfer menu.
Upon completion of uploading, the BHT displayed the screen shown
at left and beeps once.
Press the C key to return to the SYSTEM MESSAGE transfer menu.
When the BHT uploads the system message file, it creates a
temporary file named "_B80MSG.FN3" in the user area. If the
user area is insufficient for creating the temporary file, therefore,
an error will result.
The created temporary file will be automatically deleted after
completion of uploading.
Problem
The memory is insufficient for setting up the system message file.
Solution
Press the C key to return to the SYSTEM MENU, then delete
unnecessary files in the memory. (Refer to Subsection 2.5.3, [ 7 ].)
88