Downloading/Uploading The System Message File; Menu) - Denso BHT-1505B User Manual

4.5.17 Downloading/Uploading the System Message File

(SYSTEM MESSAGE Menu)
The system message file is a file (file name: "_B15MSG.FN3") used by the system to display messages
such as "Shutdown in progress. Do not remove the battery." or "Charge the battery!".
Downloading/Uploading the System Message File
(1) Upload the system message file to the host computer and so on.
(2) Download the uploaded system message file at another BHT.
♦
Uploading the System Message File
Create a system message file based on the current system message settings and upload it to the host
computer and so on. After uploading, delete the created system message file.
♦
Downloading the system message file
Receive the system message file from the host computer and so on to which it was backed up, and after
setting the stored system messages, delete the received system message file.
The communication parameters and communication protocol set at "[5] Setting the communication
environment" in Chapter "4.5.6 [5] System Environment Settings" are used when uploading and
downloading.
- Point -
Use the following procedure to download and upload the system message file.
5.
Press the 6 key while holding down the SF key at the SYSTEM
MENU.
The SYSTEM MESSAGE menu is displayed as shown on the right.
[1: DOWNLOAD]:
Downloads the system message file.
[2: UPLOAD]:
Uploads the system message file.
Refer to the following section for details of the above items.
Press and hold the BS/C key to return to the SYSTEM MENU.
System messages are normally set when the BHT is shipped from the factory, and
therefore operation at this menu is unnecessary.
BARCODE Handy Terminal
177