Cleaning The Black Mark Sensor; Cleaning The Scanner Window - Avery Dennison Pathfinder 6140 Equipment Manual

Cleaning the Black Mark Sensor

To clean the black mark sensor:
1. Turn off the printer and open the supply cover.
2. Remove the supplies.
3. Open the label deflector by gently pushing down on the label deflector.
4. Clean the black mark sensor with a dry cotton swab.
Black Mark
Sensor
5. Reload the supplies, close the supply cover and the label deflector.

Cleaning the Scanner Window

Clean the scanner window whenever it appears to be dirty or smeared. To clean it:
1. Turn off the printer.
2. Moisten a soft cloth with distilled water. Do not use household cleaners to clean the printer.
3. Gently wipe the window until it is completely clean.
Pressing too hard on the window can crack or dislodge the window.
Note:
Scanner Window
Care & Maintenance 4-3