Brother MFC-3340CN Service Manual page 16

6. Liquid Crystal Display (LCD)
Displays messages on the screen to help you set up
and use your machine.
7. Dial Pad
Use these keys to dial telephone and fax numbers
and as a keyboard for entering information into the
machine.
The # key lets you temporarily switch the dialing
mode during a telephone call from Pulse to Tone.
8. Navigation keys
Menu/Set
The same key is used for Menu and Set operations.
Lets you access the Menu to program and store your
settings in the machine.
When using the speaker or during ringing in fax
mode, you can press these keys to adjust the volume.
Search/Speed Dial
Lets you look up numbers that are stored in the
dialing memory. It also lets you dial stored numbers
by pressing # and a two-digit number.
Press to scroll backward to a menu selection.
or
Press to scroll through the menus and options.
Hold (FAX1940CN only)
Lets you place telephone calls on hold.
9. On/Off
On/Off
Power Save (FAX1835C only)
You can turn the machine on or off.
Also, you can set the On/Off Setting so the machine
can still receive faxes when it is turned off.
Lets you start sending faxes or making copies in full
color.
Also for MFC3340CN/3240C, lets you start a
scanning operation (in color or mono, depending on
the scanning setting on your PC).
Black Start
Mono Start (FAX1835C only)
Lets you start sending faxes or making copies in
black and white.
Also for MFC3340CN/3240C, lets you start a
scanning operation (in color or mono, depending on
the scanning setting on your PC).
Stops an operation or exits from the menu.
13. Message Center keys (FAX1940CN only)
MC On/Off
Lets you activate the Message Center and will blink
if you have new messages.
Play/Record
Lets you listen to voice messages stored in memory.
Also, lets you record telephone calls.
Erase
Lets you delete voice messages, all fax messages or
all messages.
14. PhotoCapture (MFC3340CN only)
Lets you access the PhotoCapture Center™ mode.
1-6
10. Color Start
11. Black Start
12. Stop/Exit
Confidential