2 ] Update The Head Property Information Stored In The Eeprom On The Main Pcb - Brother MFC-3340CN Service Manual

[ 2 ] Update the head property information stored in the EEPROM on the main PCB

For the MFC3240C/FAX1840C U.S.A./Canadian models, skip steps (1) through (3) below.
(1) Make sure that the machine's power cord is unplugged from an electrical outlet.
If the machine is connected to a PC, unplug the USB cable.
(2) Switch on the PC.
(3) Plug the machine's power cord into an electrical outlet.
(4) Enter the maintenance mode.
(5) Connect the machine to the PC using the USB cable.
(6) On the PC, run the ID/head property setup utility (BrUsbsn.exe) in the folder created. The
following window appears.
(7) On the Model menu, click BH.
Confidential
6-8