5.1.2
Jam Clear Cover, Blank Cover* and Handset Mount**
(1) Hold the two lock arms inwards and pull the jam clear cover to the rear.
(2) Remove the blank cover* (handset mount**) from the upper cover using a spring hook. Insert
the spring hook through the cutout as shown below and pull it outwards to disengage the boss
provided inside the blank cover* (handset mount**) from the lock section provided on the
upper cover.
Jam clear cover
Lock arm
Upper cover
Lock arm
Handset mount**
Cutout
Blank cover*
*MFC3340CN/3240C and FAX1835C
**FAX1940CN/1840C
5-6
Boss
Viewed from the inside
of the handset mount
Spring hook
Lock section on
the upper cover
Confidential