Travel Check Of The Head/Carriage Unit, Initial Setup Mode, And Ink Absorber Count (Function Code 63) - Brother MFC-3340CN Service Manual

8.5.12 Travel Check of the Head/Carriage Unit, Initial Setup Mode, and Ink Absorber Count (Function
code 63)
n Function
This procedure has the following three functions:
- Moving the head/carriage unit to the head replacement position (Function code 63 + *).
- Enabling or disabling the initial setup mode when the power is applied at the next time (Function
code 63 + 1 or +3).
- Resetting the ink absorber counter to the count specified for a spare ink absorber box at the
replacement time of the ink absorber box (Function code 63 + 9).
n Operating Procedure
(1) Press the 6 and 3 keys in this order in the initial stage of the maintenance mode.
The "MAINTENANCE 63" will appear on the LCD.
(2) To make the head/carriage unit travel to the head replacement position, press the * key.
After completion of head replacement or adjustment jobs, press the Stop/Exit key. The
head/carriage unit returns to the home position where the head/carriage unit will be locked.
(3) To enable or disable the initial setup mode* when the power is applied at the next time, press the
1 or 3 key, respectively.
If you enable the initial setup mode, wait until the "INIT" appears on the LCD and the
head/carriage unit becomes locked. When the "HEAD LOCKED" appears, turn the power off.
NOTE: Enabling the initial setup mode resets all counts which can be displayed with Function
code 80 (described in
If you disable the initial setup mode, the machine displays the "NOT INIT" on the LCD and
returns to the initial stage of the maintenance mode.
*
The initial setup mode allows the user to prime the ink supply tubes with ink or perform a print test
when the power is first applied.
(4) To reset the ink absorber counter to the count specified for a spare ink absorber box, press the 9
key.
Section 8.5.19 "Display of the Equipment's
8-27
Log") to zero.
Confidential