8 ] Print Out A Test Pattern; 9 ] Load The Firmware Designed For The Corresponding Model To The Flash Rom (Required For The Mfc3240C/Fax1840C U.s.a./Canadian Models) - Brother MFC-3340CN Service Manual

[ 8 ] Print out a test pattern

Press the 0 and 9 keys in this order.
Refer to Chapter 8, Section 8.5.3.
[ 9 ] Load the firmware designed for the corresponding model to the flash ROM (Required for the
MFC3240C/FAX1840C U.S.A./Canadian models)
(1) On the machine, press the 9 key twice to exit from the maintenance mode.
(2) After the head/carriage unit returns to the home position, unplug the machine's power cord from
the electrical outlet.
(3) While holding down the 5 key, plug the power cord of the machine into an electrical outlet.
(4) On the PC, run "FILEDG32.exe" in the folder created in
The Filedrgs window appears as shown below.
(5) Drag and drop the firmware file that has been designed for the corresponding model repaired
onto the BHL2-Maintenance Printer icon in the Filedrgs window shown above.
When the work PC starts loading the firmware file to the flash ROM of the machine, the
machine beeps intermittently. Loading terminates in approx. one minute.
Section 6.1.1.
6-21
Confidential