Brother MFC-3340CN Service Manual page 108

< Disassembly of the control panel ASSY >
1) Place the control panel ASSY upside down. Pull the two "X" latches outwards to release the
rear edge of the control panel PCB.
NOTE: Do not pull away the control panel PCB that is connected to the LCD.
2) Slightly lift up the control panel PCB, unlock the flat cable connector on the PCB's inside face,
and disconnect the LCD flat cable.
FAX1940CN: The microphone harness is taped together with the panel-main harness. Lift up
the MIC cover, microphone (MIC), and bushing.
Panel-main harness
MI cover
Microphone (MI )
MI busing
2 "Y" latches
ontrol panel
(placed upside down)
ontrol panel P B
2 "X" latches
5-10
Rubber keypad
L D support
L D
over open sensor
actuator
Actuator spring
2 "Z" latches
(Rear)
Confidential