Handset Mount* 1 , Dummy Mount* 2 , Battery Assy* 3 , Sensor Pcb, Cover - Brother FAX560 Service Manual

1.5 Handset Mount*
Hook Switch Actuator*
(1) Release the latches with a flat screwdriver in the order of • and ‚ while twisting the handset
1
mount*
(2) MC models: To replace the battery ASSY (Ni-MH battery), plug the power cord of the
facsimile equipment into a power outlet, disconnect the battery harness from the main PCB,
and take out the battery ASSY from the main frame. Set a new battery ASSY and unplug the
power cord.
Disconnecting the battery harness with the power cord unplugged will lose the settings (e.g.,
calendar clock, voice messages, and received FAX data) stored in the RAM.
If you do not need to replace the battery ASSY, take out the battery ASSY from the main
frame and put it on the main PCB with the battery harness being connected.
1 2
, Dummy Mount* , Battery ASSY*
1
(*
2
or dummy mount* so that it tilts over to the left.
3
, Sensor PCB, Cover Sensor Actuator, and
1
For models w/ handset, *
IV - 21
2
For models w/o handset, *
3
For MC models)