Using the Printer
g
Click [Print] in the computer program's menu.
For RJ-3050, the POWER indicator blinks in green to indicate that the printer is receiving data, and the
document is printed.
For RJ-3150, the message [Printing] is displayed on the LCD display. When printing is finished, the
mode before printing started returns.
h
Turn the printer off by pressing and holding the
(for RJ-3050) or the LCD display turns off (for RJ-3150).
Note
• When turning the printer off, keep the AC adapter connected or the batteries installed until the STATUS
indicator goes off (for RJ-3050) or the LCD display turns off (for RJ-3150).
• To print a JPEG image without using the printer driver, see JPEG Printing on page 91.
Making Prints Lighter or Darker
You can make prints lighter or darker by adjusting the print density setting in the printer driver's dialog box or
the Device settings (see Device Settings on page 66).
When using the battery, changing the print density setting may result in slight changes in printing speed and
the number of pages that can be printed on a single charge.
(Power) button until the STATUS indicator is lit in red
2
2
44