Connecting To A Dc Power Socket (Optional); Using The Battery Charger (Optional); Using The Cradle (Optional) - Brother RJ-3050 User Manual

Setting Up the Printer

Connecting to a DC Power Socket (Optional)

Connect the printer to your vehicle's 12 V DC power socket (cigarette lighter, etc.) to charge the rechargeable
battery.
a
Connect the car adapter to the vehicle's 12 V DC power socket.
b
Connect the car adapter to the printer.
1 Car adapter
Note
The car adapter is an optional accessory.

Using the Battery Charger (Optional)

The rechargeable Li-ion battery can be charged using the dedicated battery charger (PA-BC-001).
When you use an AC power socket, up to four battery chargers can be connected together for charging at
the same time.
For details, refer to the operation manual that is included with the battery charger.

Using the Cradle (Optional)

The rechargeable Li-ion battery can be charged by placing the printer with the battery installed into the
dedicated cradle (PA-CR-001) and connecting the power cord.
When you use an AC power socket, up to four cradles can be connected together for charging at the same
time.
For details, refer to the operation manual that is included with the cradle.
1
1
1
1
1
7