Preparation; Specifying Settings In The P-Touch Template Settings Tool - Brother RJ-3050 User Manual

Printing Labels Using P-touch Template (RJ-3150 Only)

Preparation

Before connecting the barcode reader to this printer, specify barcode reader settings and the settings in the
P-touch Template Settings tool.

Specifying Settings in the P-touch Template Settings Tool

a
Open the P-touch Template Settings tool.
Note
To open the P-touch Template Settings tool, first open the "Printer Setting Tool". The Printer Setting Tool
is installed at the same time as other software such as the printer driver. For details, see Installing the
Printer Driver and the Software on page 21 and Printer Setting Tool on page 49.
b
Select the appropriate settings, and then click the [Set] button.
Note
As a default setting, printing will begin when the code "^FF" is read with the barcode reader. (This can be
changed with the settings at A.)
If [Received Data Size] is selected and the number of bytes is specified, printing will begin automatically
after barcodes for the specified number of bytes are scanned. If printing is performed from the computer
after selecting this setting, the parameter will return to the default setting mentioned above. After printing
from the computer, change the settings again.
A
5
5
5
93