Brother RJ-3050 User Manual page 181

Troubleshooting
I cannot complete the Wi-Fi settings network setup configuration. (continued)
Question
Is your Brother printer correctly
connected to the network?
I have checked and tried all of the
above, but still cannot complete
the wireless configuration. Is
there anything else I can do?
Your Brother printer cannot print over the network.
Your Brother printer is not found on the network even after successful installation.
Question
Are you using security software? See I'm using security software. on page 173.
Is your Brother printer assigned
with an available IP address?
Did your previous printing job
fail?
Solution
For RJ-3050, check the Wi-Fi indicator on the printer.
: The network is correctly connected.
(flashes once every 3 seconds): The network is not connected correctly, and
the wireless network setup must be reconfigured.
For RJ-3150, check the WLAN icon on the LCD display.
: The network is correctly connected.
The network is not connected correctly, and the wireless network
:
setup must be reconfigured.
: The wireless network settings are disabled.
Turn your Brother printer Off and back On. Then try and configure the Wi-Fi
settings again.
Solution
 Confirm the IP address and the Subnet Mask.
Verify that both the IP addresses and Subnet Masks of your computer and your
Brother printer are correct and located on the same network.
For more information on how to verify the IP address and the Subnet Mask, ask
the network administrator.
 Confirm your IP address, Subnet Mask and other network settings with
[Communication settings] in the Printer Setting Tool.
See Printer Setting Tool on page 49.
 If the failed printing job is still in your computer's print queue, delete it.
Double-click your printer's icon in the following folder and then choose [Cancel
All Documents] in the [Printer] menu:
®
(Windows Vista / Windows Server
, [Control Panel], [Hardware and Sound] and then [Printers].
®
(Windows 7 / Windows Server
, [Devices and Printers] and select your printer from [Printers and Faxes].
®
(Windows 8 / Windows
®
Windows Server 2012 R2)
[Apps] screen, [Control Panel], [Hardware and Sound], [Devices and
Printers] and select your printer from [Printers and Faxes].
®
2008)
®
2008 R2)
® ®
8.1 / Windows Server 2012 /
18
172