Button Functions - Brother RJ-3050 User Manual

Using the Printer

Button Functions

(Power) button function
Turn the printer on
Turn the printer off
Start up the printer in mass storage
mode
(Feed) button function
Feed the paper
Print the printer set-up information
(Wi-Fi) button function
(RJ-3050 only)
Use WPS to set wireless network
settings easily
Use Wi-Fi to communicate when
printing
End the Wi-Fi connection
Execute a file stored in the mass
storage area
Operation
While the printer is turned off, press and hold the
POWER indicator lights in green (for RJ-3050) or the LCD display turns on
(for RJ-3150).
While the printer is turned on, press and hold the
POWER indicator turns off (for RJ-3050) or the LCD display turns off (for
RJ-3150). (If the [Auto Power Off] feature is enabled in the Device settings,
the printer will turn itself off automatically after the selected period of inactivity.)
If you press and hold this button while also pressing the
(for RJ-3050) or the OK button (for RJ-3150), the printer starts up in mass
storage mode (see Mass Storage on page 90).
Operation
When the paper type is set to [Die-cut Label] or [Media With Marks]:
Press the (Feed) button to automatically feed the paper to the print
position.
When the paper type is set to [Continuous Length Tape]:
Press the (Feed) button to feed the paper. The paper feeds a fixed length;
you can use a command to change this length.
Make sure that a roll is set, and then press and hold the
printer starts printing its settings (see Printing the Printer Set-up Information
on page 115).
Operation
Wi-Fi settings can be configured by simply pressing and holding this button,
making it easy to install the printer driver or other software (see Installing the
Printer Driver and the Software on page 21).
When the printer and computer are not connected via Wi-Fi, press this button
to connect them and send data to the printer.
When the printer and computer are connected via Wi-Fi, press this button to
end the connection.
If you press this button while the printer is running in mass storage mode, you
can execute a command file stored in the mass storage area (see Mass
Storage on page 90).
2
(Power) button until the
(Power) button until the
( ) button
Bluetooth
(Feed) button. The
40
2