Printing The Printer Set-Up Information - Brother RJ-3050 User Manual

Reference

Printing the Printer Set-up Information

You can use the (Feed) button to print a report that lists the following printer settings:
 Program version
 Printer usage history
 Missing dot test pattern
 Printer settings information
 List of transferred data
 Network setting information
Note
• You can use the Device settings to set in advance which items will be printed (see Device Settings
on page 66).
• The node name appears in the Printer Settings. The default node name is "BRWxxxxxxxxxxxx".
("xxxxxxxxxxxx" is based on your printer's MAC Address/Ethernet Address.)
a
Make sure that a roll of 76.2 mm receipt paper has been loaded and the RD Roll compartment cover is
closed.
b
Turn on the printer.
c
Press and hold the
the message [Printing] is displayed on the LCD display (for RJ-3150).
The settings will print.
Note
• To print the Printer Set-up Information, we recommend to use 76.2 mm receipt paper.
• This operation can also be performed using the Device settings (see Device Settings on page 66).
• If you have an RJ-3150, this operation can also be performed from the [Information] menu.
1
Press the [Menu], [ ], or [ ] button to select the [Information] menu, and then press the [OK]
button.
2
Select [Print Configuration] > [Start] using [ ] or [ ], and then press the [OK] button.
(Feed) button until the POWER indicator starts blinking in green (for RJ-3050) or
7
7
115