Barcode Printing (Copying) - Brother RJ-3050 User Manual

Printing Labels Using P-touch Template (RJ-3150 Only)

Barcode Printing (Copying)

A barcode scanned with the barcode reader can be printed with the protocol and size of a previously created
template.
Note
• For details on the barcodes that can be scanned for the various settings, refer to List of Barcodes for
Specifying Settings on page 186.
• If the barcode to be scanned with the barcode reader has a different protocol than the barcode template
already registered with the printer, it may not be possible for the barcode to be created and printed.
a
Using P-touch Transfer Manager, transfer (from P-touch Editor 5.1 to the printer) the barcode template
to be printed. (For details, see Using P-touch Transfer Manager on page 136.)
Note
Be sure to create barcode templates that comply with the limits on the size and number of digits for the
barcode to be created. The barcode cannot be created if it exceeds the number of digits specified in the
template.
b
When data is transferred to [Configurations] in P-touch Transfer Manager, the [Key Assign] number is
automatically specified.
c
Select the folder containing the data to be transferred, and then click the [Transfer] button to transfer
the data to the printer.
d
Scan the "P-touch template command (Initialise + begin specifying settings)" barcode.
Refer to List of Barcodes for Specifying Settings on page 186.
e
From the "Basic settings" barcodes, scan the barcode for the parameter whose setting is to be specified.
CODE128/9-digit/69 mm×17 mm
5
5
97